Is there such a thing as spacers or risers for turbos?

[1986.5supra_kid]

Is there such a thing as spacers or risers for turbos?

specifically t4 divided?

my hx35 is to close to the manifold on the compressor side and to close to the frame to weld on a elbow. so maybe some altitude would help?

 

[hvyman]

Yes just use another flange and either weld it on or use 2 gaskets. Like a sandwhich.

 

[IJ.]

 

[1986.5supra_kid]

So i could buy 2 flanges and weld the 2 around the outside and it would work? Im still trying to figure out how much i need to elevate the turbo.

 

[IndigoMKII]

So i could buy 2 flanges and weld the 2 around the outside and it would work? Im still trying to figure out how much i need to elevate the turbo.

just make mock up spacers out of wood to get the height adjusted correctly.

 

[1986.5supra_kid]

Ah one out wood sounds ingenious! I like! Btw anyone have t4 plate dimensions for the divided. Ill have the machine shop ag work make one when i figure out the height and maybe the angle if needed :/

 

[V8KILR]

Here is the T4 flange dimensions.



I have a T4 divided 20mm spacer in mine. Got it CNC machined out of 20mm plate.