I will paypal you $5 if...

kelson

kelson

New Member
Apr 17, 2009
270
0
0
Socorro, NM
Hey guys
So my tensioner pulley on my 1jzgte died yesterday for no reason. Its all melted (pics later). I was really looking forward to going drag racing tomorrow so I want to fix my car right now. I went all over town looking for the pulley but nobody sold it. apparently the pulley only comes with the whole tensioner which is like $160!!! I don't want to spend that much for a stupid plastic pulley. So here's the deal, $5 up for grabs if you can find me a pulley that will fit and I can pick up at a parts store. or pm me if you have one you can sell me because lets be honest I probably cant fix it today.

Thanks everyone.
 
garagefujimoto

garagefujimoto

Local Tire Destroyer
May 27, 2005
997
0
0
42
Calgary, Alberta, Canada
OK:
You could replace the center bearing with a 6203-V229 but why?
You could buy the whole tensioner but why?

Step 1: Find a parts expert who is not a moron.

Step 2: Find this person at your local Napa or whatever brand store.

Step 3: Bring your pulley as a sample. Do not tell them the year/make/model as it doesn't matter.

Step 4: Measure your old pulley.

It should be 6 rib belt width 30 mm, smooth on the outside + 100 mm tall (4 in) and have a center hole of 17mm (0.67 in)
If this is true, then get them to sell you a pulley by dimension.
I have already looked for you.
Go to page 19 of this http://www.daycoproducts.com/daycoweb.nsf/DaycoAutomotiveTensionersandPulleys.pdf
Look at #89055. Who cares what car it is for.
If they don't sell Dayco then get them to cross the number to Gates or other brand.
If they can't do this, then shop elsewhere.

I wil take my paypal at supra.a70@gmail.com

Evan
- Employee of the Year - Advantage Ford
- Dean's Award Winner - Government of Canada Red Seal Parts Technician
 
kelson

kelson

New Member
Apr 17, 2009
270
0
0
Socorro, NM
jetjock;1924839 said:
5 bucks? Seriously?
Click to expand...

Ya because then people click on the thread. Lol

garagefujimoto;1924864 said:
OK:
You could replace the center bearing with a 6203-V229 but why?
You could buy the whole tensioner but why?

Step 1: Find a parts expert who is not a moron.

Step 2: Find this person at your local Napa or whatever brand store.

Step 3: Bring your pulley as a sample. Do not tell them the year/make/model as it doesn't matter.

Step 4: Measure your old pulley.

It should be 6 rib belt width 30 mm, smooth on the outside + 100 mm tall (4 in) and have a center hole of 17mm (0.67 in)
If this is true, then get them to sell you a pulley by dimension.
I have already looked for you.
Go to page 19 of this http://www.daycoproducts.com/daycoweb.nsf/DaycoAutomotiveTensionersandPulleys.pdf
Look at #89055. Who cares what car it is for.
If they don't sell Dayco then get them to cross the number to Gates or other brand.
If they can't do this, then shop elsewhere.

I wil take my paypal at supra.a70@gmail.com

Evan
- Employee of the Year - Advantage Ford
- Dean's Award Winner - Government of Canada Red Seal Parts Technician
Click to expand...

Thanks some great info here but not what I need. I need some to say par numbe xxxx will work. I cannot measure the old pulley because it is sheared in half then melted then half of it dissappeared and the bearing is all bent up and my car is 80 miles away. So thanks but I really need something more specific.
 
jdmfreak

jdmfreak

PACNW
Oct 8, 2010
2,232
0
0
north clark co. WA.
kelson;1924868 said:
Ya because then people click on the thread. Lol



Thanks some great info here but not what I need. I need some to say par numbe xxxx will work. I cannot measure the old pulley because it is sheared in half then melted then half of it dissappeared and the bearing is all bent up and my car is 80 miles away. So thanks but I really need something more specific.
Click to expand...

He gave the dimensions and a part number :-\ how more specific do you need?
 
OneJArpus

OneJArpus

Supramania Contributor
Jul 1, 2005
2,798
0
0
40
Newark, New Jersey, United States
If you clicked on the

" Your 1JZ-GTE And 2JZ-GTE Swap Guide For Dummies" thread the answers in there


New Idler Pulley: GATES Part # 36100 (Must Clearance Stock Tensioner Assembly; Very Easy)
New Idler Pulley = Rib, O.D.75MM x Width 17MM x Bearing ID 17MM
Idler Pulley From 2000 Honda S2000

paypal one.5jz@gmail.com thank you. LOL
 
garagefujimoto

garagefujimoto

Local Tire Destroyer
May 27, 2005
997
0
0
42
Calgary, Alberta, Canada
you are too late LOL

but just in case someone pushes search*
1JZ Serpentine Belt Tensioner Pulley

Gates 38002 Dayco 89055

It wasn't the 5 bucks for me, I have the day off and he neded help
 
Last edited:
kelson

kelson

New Member
Apr 17, 2009
270
0
0
Socorro, NM
garagefujimoto;1924984 said:
you are too late LOL

but just in case someone pushes search*

1JZ Serpentine Belt Tensioner Pulley
Gates 36100
Dayco 89055

It wasn't the 5 bucks for me, I have the day off and he neded help
Click to expand...

That Gates 36100 is a ribbed pulley like the s2000 so that's probably for the Ac and Ps delete. I found that Gates 38002 is exactly the same as Dayco 89055.

jetjock;1924885 said:
Wow. What some people will do for 5 bucks.
Click to expand...

The whole 5 dollars thing was just because half the time that I see another "1jz rough idle" or "help me, car wont start" threads I just skip over them, even though I may be able to help. I feel bad saying that but I'm sure alot of people do that. So I made my title something people would click on.
 
kelson

kelson

New Member
Apr 17, 2009
270
0
0
Socorro, NM
Just to confirm for anybody reading this post in the future I installed the Gates 38002 pulley on my 1jz and it works perfect.
 
You must log in or register to reply here.
Top Bottom