When I bought my motors the Connectors were cut off for the dash connectors. So as I am trying to wire up my 87 ma70 following the diagrams I have found an issue my male plug b1 wire 12 black white wire needs to mate to the Black white wire from ih1 I dont have this wire on the IH1 connector under the ih2 pin it reads conn II pin #7 am i missing something here? I need some help badly I really need to get the car on the road.
Huge wiring issue! need help ASAP
- Thread starter tko_mk3
- Start date
Do you have a manual transmission harness? If so, pin 10 on IH1 should be black w/blue stripe, which connects to pin 12 of B1 (black w/white stripe). Some of the wiring diagrams show A/T car wiring and can be confusing since the colors of the those pins changed for A/T (which had an additional Neutral start circuit).