Hey guys so i'm changing my head gaskets. I took off most of the throttle assembly i just need that one cable that comes around from the back and is directly connected to the y pipe. i dont know how to remove it and i don't wanna fuck anything up. can you guys walk me through that? :1zhelp:
How to remove throttle assembly from y pipe?
- Thread starter berto22
- Start date
twist the throttle by hand, it should give you enough slack to pull the cable out of it's holder. You need to push the cable down and slide the stopper/cable out to the side. Should be clear when you have a look at it.
If you can't get enough slack, you'll need to undo the lock nuts on the bracket (in between top and middle arrows of your photo
If you can't get enough slack, you'll need to undo the lock nuts on the bracket (in between top and middle arrows of your photo