This info may be useless but trying to get as much as I can to help.
If it matters it will me flowing out a HKS mani through a 3 1/2", S/S custom exhaust from the mani back out a N1 exhaust.
I am looking for the RPM's this turbo will start to begine sool and when it will reach full spool if possible. I have not used this turbo before. I am coming from the stock ct.
I am trying to figure my stall.
PTE-63
Inducer mm.---63mm
Wheel Inducer---2.476"
Wheel Exducer---3.310"
Wheel Trim---56
Inlet/Outlet---4" / 3"
Size Bearing System---360 Race
A/R Ratio---On Center .69
Wheel Styles---P-trim
Wheel Inducer---2.920"
Wheel Exducer---2.420"
Wheel Trim ---2.420"
Thanks; Larry T.
If it matters it will me flowing out a HKS mani through a 3 1/2", S/S custom exhaust from the mani back out a N1 exhaust.
I am looking for the RPM's this turbo will start to begine sool and when it will reach full spool if possible. I have not used this turbo before. I am coming from the stock ct.
I am trying to figure my stall.
PTE-63
Inducer mm.---63mm
Wheel Inducer---2.476"
Wheel Exducer---3.310"
Wheel Trim---56
Inlet/Outlet---4" / 3"
Size Bearing System---360 Race
A/R Ratio---On Center .69
Wheel Styles---P-trim
Wheel Inducer---2.920"
Wheel Exducer---2.420"
Wheel Trim ---2.420"
Thanks; Larry T.