hks vpc inquiry

[jrot]

hope im not repeating but i think im picking up a vpc and i have a few quick questions....

1. with the VPC installed can i delete the hose from the IACV to the accordian and just run a breather off of the valve itself?

2. with the VPC installed i can then vent my bov to atmosphere?

2.a. until i get a proper BOV can i just pull the one hose off the bosch valve and vent that way?

2.b. if so which hose would i not use?



hope im not re asking questions or sounding stupid.

 

[jrot]

nobody? really? i know someone must be running a vpc and know the answers to this...

 

[drjonez]

nobody? really? i know someone must be running a vpc and know the answers to this...

Really.

Your questions indicate you do not have a clear understanding of a mass-flow metered system vs. speed-density. Perhaps more learning is in order....that said, out comes the spoon:

hope im not repeating but i think im picking up a vpc and i have a few quick questions....

1. with the VPC installed can i delete the hose from the IACV to the accordian and just run a breather off of the valve itself?

Yes.

2. with the VPC installed i can then vent my bov to atmosphere?

If you have a strong spring or pull-type BOV, yes.

2.a. until i get a proper BOV can i just pull the one hose off the bosch valve and vent that way?

No. @ idle the stock valve is open, making a HUGE vac leak and sucking in all kinds of crap. Yes, in theory the VPC should make it possible to do so, but it is a dumb idea.

 

[91Supra313]

The good Dr is right! But he forgot one thing....The knife and fork for that meal.

 

[super.secret.supra.club]

hope im not repeating but i think im picking up a vpc and i have a few quick questions....

1. with the VPC installed can i delete the hose from the IACV to the accordian and just run a breather off of the valve itself?

2. with the VPC installed i can then vent my bov to atmosphere?

2.a. until i get a proper BOV can i just pull the one hose off the bosch valve and vent that way?

2.b. if so which hose would i not use?



hope im not re asking questions or sounding stupid.

1. yes
2. yes
2a. yes
2b. cap the side that goes to the accordion.


although drjones is right about the using your stock bov.

i can confirm this works cuz i did it on my last 7m

 

[jrot]

well i did understand just needed to be sure...i would rather make mistakes on the forum than my car....and my bov isnt stock but it kinda is...its the bosch audi/porsche.....i didnt think it was smart but though it might work till i get a aaqv or something after christmas....that all....and thank you for the meal is was very tasty...sorry for imposing.

 

[drjonez]

The Bosch 710N (the valve you have...) is the same type as stock....and will function just as I outlined above.

 

[jrot]

thank you.

 

[jrot]

did this ever sell? or is it still hanging around? wrong thread so so sorry....