Hex head cap scew size 7M

[AW11inVa]

I need to stop by the hardware store and get a hex key big enough to put those 4 cap screw things back in the head. They are the big ones that are down the center of the spark plug valley of the 7M. I guess they hold down the cover the plug wires go into.

Also there is one with a hole in the center that is tapped. Where does that on go?

 

[87targa]

I believe it's a 14?? just get a bolt that fits and it should work. if anything you can go to autozone and they should have the correct tool.

um...the tapped hole one goes...towards the firewall? don't quote me on that though.

 

[WhtMa71]

Ones in the sparkplug galley are 14s. I used an old headbolt from a honda with a nut welded on the end.
Edit..The tapped plug holds one of the sparkplug wire holder things i believe.

 

[AW11inVa]

Thanks guys.

 

[screaminglemon]

none of the local stores around me had that size hex. and when i asked, they all looked at me like i was nuts. but i did find it cheap on ebay.

 

[thebuddrik]

The one that is taped is for a little bracket for the heater hose and it does go toward the firewall.
I know because my head is on my dinning room table. My wife aint happy!

 

[Justin727]

i ordered a set off ebay.

 

[ilikebigbutts]

yes it is a 14 allen

 

[IJ.]

14mm inhex socket works well

 

[ilikebigbutts]

thats what i used but i found it harder to find than an allen.sears was out of 14s!!!