help synapse bov not working?

[jonny87turbo]

ive tried everything i can think of to get this bov to work. I have ports A and B hooked up after the throttle body. Also I tee'd off the wastegate hose to the turbo to port c.
my car still compressure surges.

Do you guys have any pics of where you hooked your lines to your bov?

 

[MK3Brent]

What did the manual say?

 

[redhot91gt]

Sounds like you have it routed right. The two ones on the rear go to vacuum and the one on the side goes to boost only. There is a adjustment on these but I have never adjusted mine and it says they dont need adjustment, But I beleive it tells you how just in case in the manual. If you need that info I can look it up tomorrow.

 

[jonny87turbo]

yea i didnt adjust the pre load for it at all it said to have it loose as possible.
well I thinks the discharge of the bov is too stepped down to small where i put it in the intake. I put a smaller hose so it would fit in the intake. I took the car down the road with the discharge not hooked up in the intake and It seems to be working now. So im waiting on the anti stall kit to come in. Any one else have this problem?