i have an safc and from what i've read, i heard that you wont need a boost cut controller....
my question is..will i ever need one if i raist the boost?
i tried raising my boost today and 18 and down is fine and dandy but anything sleightly over that and it hits a brick wall....is this boost cut or bad tuning?
my afr is low 11's at wot with 18ish psi.
on a side note...i realize my safc recorded my max rpm at 7528??? on stock ecu??? is that weird?
mods: single, 2j map, 370cc, stock block..after market most everything else, safcii, aem uego wb.
my question is..will i ever need one if i raist the boost?
i tried raising my boost today and 18 and down is fine and dandy but anything sleightly over that and it hits a brick wall....is this boost cut or bad tuning?
my afr is low 11's at wot with 18ish psi.
on a side note...i realize my safc recorded my max rpm at 7528??? on stock ecu??? is that weird?
mods: single, 2j map, 370cc, stock block..after market most everything else, safcii, aem uego wb.