does anyone have garage floor hooks/anchors/bolts, they would be useful to pull in my supra into my garage, has anyone installed these
garage floor hooks/anchors/bolts
- Thread starter JDM PIMP
- Start date
You might give some consideration to setting them so they're recessed, but yeah, shouldn't be too hard.
http://www.davisaircraftproducts.com/section4page1.jpg
These should do pretty much whatever you want. They also sell all kinds of straps, clips, and whatever else you may find necessary.
To bolt them down, use a double expansion anchor like this:
http://www.confast.com/products/double-anchor.aspx Using the 1/4" bolts in each mounting hole for the bracket should be more than acceptable.
In enclosed race car trailers, they usually use a winch to pull a car in. It would probably be easier to push the car in with some buddies, or a car with a similar bumper height and an old tire in between, then to try to pull it in.
These should do pretty much whatever you want. They also sell all kinds of straps, clips, and whatever else you may find necessary.
To bolt them down, use a double expansion anchor like this:
http://www.confast.com/products/double-anchor.aspx Using the 1/4" bolts in each mounting hole for the bracket should be more than acceptable.
In enclosed race car trailers, they usually use a winch to pull a car in. It would probably be easier to push the car in with some buddies, or a car with a similar bumper height and an old tire in between, then to try to pull it in.
AJ'S 88NA said:
on the wall, a few inches above the ground would work I bet...thats a good idea, but why all the hassle?
I missed the part about using them to pull the car into the garage... I think they'd be quite useful for securing the vehicle while working on it, but i agree there are probably earier ways to get it in the garage (like mounting a winch to the floor!).