My oil cooler lines are leaking on my 7mgte. So I figure its time to convert the stock oil cooler pressure relief valve with the 7mge n/a filter stud to remote thermostat.
My question is that when I look at the tsrm for the oil line #2 it looks like it connects to the block, but from the diagram on the full flow single circuit it looks like it doesn't connect to it.
What bolt/thing do I use to block off the line that goes to the block?![LU_015.gif LU_015.gif](https://www.supramania.com/data/attachments/47/47467-518eb591d9fca3097897fc9ae7d5bd82.jpg)
![Oil Cooler Diag.jpg Oil Cooler Diag.jpg](https://www.supramania.com/data/attachments/47/47468-6308dfbf0953b272c18e3f0b08e6bdeb.jpg)
My question is that when I look at the tsrm for the oil line #2 it looks like it connects to the block, but from the diagram on the full flow single circuit it looks like it doesn't connect to it.
What bolt/thing do I use to block off the line that goes to the block?
![LU_015.gif LU_015.gif](https://www.supramania.com/data/attachments/47/47467-518eb591d9fca3097897fc9ae7d5bd82.jpg)
![Oil Cooler Diag.jpg Oil Cooler Diag.jpg](https://www.supramania.com/data/attachments/47/47468-6308dfbf0953b272c18e3f0b08e6bdeb.jpg)