Ford Mustang Wheel Fitment

[jessetooslow]

ok, I have seen 2 MK3 supras with Ford mustang wheels, whats the deal? can I put mustang wheels on with no problem, let me know, I can get some nice wheels.

 

[Big Wang Bandit]

You can, They are cheap and can fit very wide wheels

 

[suprageezer]

Just saw a set on craigslist.org for 300.00 I like them too

 

[Syris]

yes they will fit without a hitch

 

[Wendigo]

Pics?

 

[drbowser3]

No idea on the offset, but here are my mustang wheels.

 

[themadhatter]

i can't remeber but cobra R wheels are either 17x7 or 17x8

 

[bountykilla0118]

17x9

 

[SySt]

I have a set of 17x9.0 +24mm offset Cobra R wheels and the fitment is awsome.

 

[The Reaper]

some cobra wheels came in 17X10 as well

the fitment is beautiful. but they are ford wheels......only downfall

 

[mk3713]

Who knows what the offset on the saleen wheels are I think they are from an 03. There 18x9 and I beleive they have the same offset as the cobra wheels but arn't too sure. I mounted them with no tire cuz I havent decide what the best tire fitment would be. I dont like them, I think they stick out of the fender too much. Any comments or suggestions. I wonder if i can fit 275-40s on the rear, I got them real cheap so they should do till I find something better.

 

[bountykilla0118]

if the rim is 9in wide yes 275 will fit

edit: i believe up to 285 will fit

 

[bwest]

but they are ford wheels......only downfall

but I would take true FMS wheels over shitty south east asian castings any day of the week.

 

[Doward]

Anyone tried stuffing a 17x10.5" cobra wheel in the back? +27mm offset...

 

[Sawbladz]

You mean like this?

http://cgi.ebay.ca/AFS-94-04-Mustan...3QQihZ013QQcategoryZ66483QQrdZ1QQcmdZViewItem

I asked a while ago about this and was told the wheels I had chosen would not fit...I will look for that thread and link to it.

 

[Doward]

Yes, actually - a set similar to those. Looks like they will stick out 5.4cm (about 2 1/4 inches) further out than stock. Might be a bit much

 

[Sawbladz]

ya...I cant find it. It would be nice to stuff those 315's in there but looks like it's not in the cards.

 

[bowsercake]

Those 10.5" ones will probably stick out at least 1/2". Probably a lot more if you are running the 315 tires. If you're not super slammed you might be able to get away with it as long as you have some stiff springs.

Those 4x4 guys always have the tires sticking out, but they don't run into things, they run OVER them.

 

[twinturbozs]

Im running a 19x10.5 (+43) with a 285 and it didnt require any rolling, but i test fitted a 10.5 (+35) with a 275 and it rubbed a bit. With rolled fenders you might be able to get away with a 10.5 (+30) and a 275 without pulling the fenders.