I removed the vaccum lines off of the Charcoal canister during my rebuild of my motor. I forgot which vacuum line connects to the Charcoal canister. It would help if some one can send me pictures where all the vaccum lines go. Thanks.
Charcoal canister Vaccum Line????
- Thread starter supra_89_vang
- Start date
Not only are they different sizes, which make it obvious where they go, but they're also labeled right on the canister. Then there's the TRSM...
It's "vacuum" btw....think of 2you.
It's "vacuum" btw....think of 2you.
Image pulled from this post in the elite engine thread:
That gives a pretty good indication I think. Ignore the 'control' line to the custom BOV.
Fuel Tank -> Charcoal Canister -> AFM-Bracket-Pass-Through -> Temperature Activated Vacuum Switching Valve -> Tube on 3000 Pipe Bracket -> one last Vacuum line into the intake plenum somewhere, heh, sorry. That's where my memory dies.
That gives a pretty good indication I think. Ignore the 'control' line to the custom BOV.
Fuel Tank -> Charcoal Canister -> AFM-Bracket-Pass-Through -> Temperature Activated Vacuum Switching Valve -> Tube on 3000 Pipe Bracket -> one last Vacuum line into the intake plenum somewhere, heh, sorry. That's where my memory dies.