Can you test a cam position sensor, NO START PROBLEM

[ImCressid]

Is there anyway to test a cam postion, gotta no start problem
I have power to the coil packs,
power to the fuses
power to the ignitor
power at ecu's ign switch, m rel,Batt, +B, +B1 and sta
and grounds are good check them also
RUNNING OUTTA IDEA
Oh IT CRANKS BUT NO START
AND MY GAUGE cluster isnt installed , and hard wired the fuel pump

 

[Neal]

What have you done to the engine?

This link should be a good start.

or

http://www.cygnusx1.net/Supra/Library/TSRM/MK3/manual.aspx?S=IG&P=16

 

[ImCressid]

7mge to 7mgte swap nothing else as far as i know, i didnt do the swap and i bought not even cranking, it cranks now but still no start

 

[CPT Furious]

You may have power to the igniter, but are you actually getting a spark? I had power to the igniter, but nothing coming out of it!

 

[ImCressid]

IDK , thats a good question, how can i test the ignitor,

 

[isnms]

http://www.supramania.com/forums/showthread.php?t=47334

 

[hvyman]

pull a plug and see if you have spark....

 

[BKCressida1718]

is the cps aligned the right way? did you hard wire it correctly? have someone turn the cps slowly while u crank. this happened to me when i did my swap and i forgot to center the motor before taking out the cps.

 

[ImCressid]

hvyman yes i did pll a plu while someone cranked and did see anything.....but my battery was dying so Im getting another one today
and
BK yes i did hard wire it, but im not sure if it is sending info to the ecu thats why i wanted to test it to see

 

[ImCressid]

hvyman yes i did pull a plug while someone cranked and did see anything.....but my battery was dying so Im getting another one today
and
BK yes i did hard wire it, but im not sure if it is sending info to the ecu thats why i wanted to test it to see