So I just got the engine in my 86.5 and I went to start it and I couldn't get the starter to kick over. Did some test and the starter is good. It seems that when I put the ignition in "acc" mode, nothing happens. When I put it in "on" mode, everything turns on except I still don't have a radio and the yellow"constant" power wire goes dead(To the radio - which still won't turn on). Turn it to the "Start" Position and the dash and such shut off to start the car, but there is no power to the starter wire. I get .19 volts to the starter wire. Seems I only get 7 volts? to pin 4(and 8) of the ignition switch. The harness itself is missing pin and wire 5. The ignition switch has pin 5 though. I can take pictures of anything you need, and will supply any addition information as needed. I am at witts end and I really just want the car to start. It ran fine before I pulled the engine and gauge cluster. :: angry ::