Brake and Clutch lines Q's. Wiper Motor Removal?

[nick88]

Hi, does anybody happen to know the parts or part numbers of the brake and clutch lines. From the master to slave for the clutch. And the sizes for these hose so I can get russell's ftiings and ss hoses and make my own.
#47313
#47312
#47322
I'm sure they are all the same size, just don't have time to go out and measure the ones on the car currently or anything.

http://www.cygnusx1.net/Supra/Library/EPC/291210/catalog.aspx?F=4708&P=2

And could someone that has taken the wiper motor off please elaborate on how to do it cause I'm stump on how to do it.

 

[IJ.]

Unbolt the Wiper Motor then pull it so the actuator shaft comes to the hole then twist the ball out of it's socket.

 

[SupraRon]

Just curious why don't you order the 1 piece clutch line from Driftmotion? Its a simple bolt on.

 

[OneJArpus]

Just curious why don't you order the 1 piece clutch line from Driftmotion? Its a simple bolt on.

and only 65 bux.

 

[nick88]

I can make it for 30, and all the hoses in the engine bay are going to be tucked so they are all going to be custom.

 

[nick88]

Bump, really need this and cant go to my car right now to measure them.

Or will this fit anyone know which one of these are going to work http://www.russellperformance.com/mc/brake_hoses/adapt_fit.shtml

Really need this info so I can get back out and work on my car once the floods go down, car is high and dry, the road just isn't......