boost gauge question

[Untouchable7mgte]

hey guys i know this sounds liek a noob question but i finally got a boost gauge and im not to sure on where i run the new vacuum line to inside the car. thanks guys.

tom

 

[supraman7mgte]

I used the vacume tube at the sender unit for the stock gauge. It is on the drivers side near the speed control device.Just disconnect the old one and take it out and insert the plastic tube to the new gauge in there.Some people will actually install it into the intake chamber for a better reading,but to each his own.

 

[SnowMongoose]

I Tee'd off the vac nipple on the rear of the intake mani.

 

[Supra Blues]

I Tee'd off the vac nipple on the rear of the intake mani.

Me too.

 

[aye mate]

Me too.

Me Three

 

[shaeff]

i didnt have anything coming off the back of the intake manifold on my JDM motor, so i just used that spot. so add me to the list, i suppose.

-shaeff

 

[jaydm16]

i also just used a manifold vacuum and let her eat.