Auto Trans CEL – read/clear signal
My 88 Cressida with A34 auto trans
Had a code 62 with an OD light blink, changed solenoids but didn’t clear the code. OD light still blinks.
Tried to read a code by wire shorting the E1 and ECT (Tt) outlets in the diag box, no response.
http://www.cygnusx1.net/Supra/Library/TSRM/MK3/manual.aspx?S=AT&P=14
Any ideas?
Am I using too big a wire?
My 88 Cressida with A34 auto trans
Had a code 62 with an OD light blink, changed solenoids but didn’t clear the code. OD light still blinks.
Tried to read a code by wire shorting the E1 and ECT (Tt) outlets in the diag box, no response.
http://www.cygnusx1.net/Supra/Library/TSRM/MK3/manual.aspx?S=AT&P=14
Any ideas?
Am I using too big a wire?