Auto harness for manula tranny switch

iaintslow

Banned
Oct 10, 2007
14
0
0
41
CA
I did search but my connector has 5 wires and colors are different. 89+
Round connector of the harness has white ,yellow, blue , red, green red wires. Which do i splice? Am i even looking at the right connector. This one is hanging down close to my starter and knock sensors. There is another round connector next to the diagnostics plug. PLEASE HELP!!!
 

thevork

ShoarmaTeam Member
Oh wait, I fabbed up a M$ Word document some time ago in which i collected all information and pictures available on supramania, supraforums and mkiiitech because a lot of info was scattered around.

Here's the complete document for getting the supra to run again, have working reverse lights and there's even some info about reconnecting the cruise control:

http://www.shoarmateam.nl/upload/auto-to-manual-r154-english.doc
 

iaintslow

Banned
Oct 10, 2007
14
0
0
41
CA
thevork;920248 said:
Oh wait, I fabbed up a M$ Word document some time ago in which i collected all information and pictures available on supramania, supraforums and mkiiitech because a lot of info was scattered around.

Here's the complete document for getting the supra to run again, have working reverse lights and there's even some info about reconnecting the cruise control:

http://www.shoarmateam.nl/upload/auto-to-manual-r154-english.doc

thats the problem, i dont have that round connector, i have white round connector with 5 wires in it and the other 2 small thats not being used. Year makes any difference? i have grey plugs 89+