Annoying code 52

[IRONMAN]

I have rewired my knock sensors with 100 percent shielded cable and replace both knock sensors with brand new. I am still getting the code and do not know what to do to fix it.

 

[BryanDyer]

you have to reset the ecu after you rewire it
it store the code in it's memory and won't go off until you reset it

 

[IRONMAN]

The light went off and came back on after I drove it.
Will the light go off if the code is still there?

 

[BryanDyer]

did you reset the ecu?

 

[jake8790]

Did you use RG58 cable? Ground at the ECU side?
Read through this carefully.
http://oldschool.supracentral.com/htm/knock.htm

 

[BryanDyer]

Did you use RG58 cable? Ground at the ECU side?
Read through this carefully.
http://oldschool.supracentral.com/htm/knock.htm

who knows what he did man he says he fixed the 4 codes he had on and then had a new code pop on I'm not sure he read the codes right or reset after he fixed it

 

[IRONMAN]

Sorry it took me so long. I have been playing with it for a while so I have become apt at reading the codes. I am not sure exactly what cable I used though. Yes I Reset the ECU