All 7M-GTE coolant hoses

metaphysico

metaphysico

Mad Scientist
Jan 2, 2008
428
0
0
44
Gainesville, Georgia
For the radiator hoses, I know you used to be able to get braided hoses that size, but I have not seen them in around 6 years. I figure for that silicone or stock. I meant for the 5/8 hose and 1/2 and such. As for using an fittings you can get end caps for them to end the line, you probably wont get as much strength out of the braids but it will end them and keep them from pulling.

Not sure if earls has the end caps but I know there are some out there that exist. Also there are a few other places that sell earls style hoses but half the price, cant remember what companies they are. Check a summit racing catalog I know they have a few brands.

Also I know all the samco hoses I have seen are designed for 1j and 2j says it will work with 7m but is a little short and have to be modified. And you can get them a lot cheeper than that ebay post. Got mine from driftmotion.
 
H

HKS_TRD

Active Member
Jul 21, 2007
998
0
36
Australia
If you do weld on fittings and hose ends you can do the radiator hose in -20 but it ends up costing $400 just for the top hose

To use the braid on the rad as per regular lines the -20 is too small, I think you may need a -24?

For the other lines I think maybe a -8 line would work. You could always pull the heater core out and weld fittings on it

Remember with braided lines anything it touches gets destroyed from rubbing. Those lines at the back there are moulded partly to keep them away from the firewall and other stuff, not sure on the US car but on the RHD car braided lines there probably wouldnt work out too well
 
H

HKS_TRD

Active Member
Jul 21, 2007
998
0
36
Australia
metaphysico;1603043 said:
Also I know all the samco hoses I have seen are designed for 1j and 2j says it will work with 7m but is a little short and have to be modified. And you can get them a lot cheeper than that ebay post. Got mine from driftmotion.
Click to expand...

There is a seller on eBay in the UK who sells the correct 7M radiator hose kit (confirmed the part number) there is a bit of a lead time on them, I have ordered them just now, see how things go. They list the accessory hose kit for RHD car too, rather expensive but I may give it some thought

I have been considering doing the black braid for some of the lines I used to have in SS but the kevlar braid is so many $$$
 
T

timtiminy

New Member
Aug 13, 2010
23
0
1
SoCal
just thought id post this for anyone who wants the Gates replacement part numbers for the oem hoses


Lower radiator - 16572-42010
Gates #21065
Upper radiator - 16571-42010
Gates #23240
To turbo - 16285-42010
Gates #18030 CUT TO FIT
From turbo - 16284-42011
Gates #No replacement
From water bypass line to head union bolt - 16282-42010
Gates #No replacement
From head union bolt to heater control valve - 87245-1B251
Gates #18888
From heater control valve to heater core - 87245-1B220
Gates #18821
From heater core to water bypass line - 87245-1B262
Gates #18855
From head to ISCV - 16261-42010
Gates #No replacement
From ISCV to throttle body - 16264-42040
Gates #No replacement
From throttle body to water bypass line - 16267-42020
Gates #No replacement
From water bypass line to thermostat housing - 16283-42010
Gates #20338 CUT TO FIT
 
Grimsta

Grimsta

Supramania Contributor
May 30, 2007
1,081
0
0
Santa Rosa, Ca.
The GATES RACING hoses which were the reinforced blue ones have been discontinued. I used to sell alot of them, then went to make an order awhile back and no more. I was like WTF!? They were like, not enough demand. I was like REally? Cuz i sold alot of them. Whatever, sucks
 
gtsfirefighter

gtsfirefighter

SM Expert on White trash
Sep 26, 2006
2,965
0
36
54
Weatherford, Texas, United States
From head to ISCV - 16261-42010


For the sake of your sanity people, replace this hose if you haven't already. Best to do it while the intake diisassembled during a rebuild, otherwise pull the alternator and hope you hands are skinny enough, and use a mirror. That little job just about drove me to Prozac.
 
hvyman

hvyman

Dang Dude! No Way Man.
Staff member
Apr 17, 2007
12,568
1
0
Fullerton,CA
If your going to replaace either little "L" shaped hose that are under the cps or at the back behind the exhaust mani get the hose from toyota. The gates 1 is like 5-6 and the 1 from toyota is 17. If you feel like fight them for 30 is worth the 10bux do by all means. But the 1 from toyota will take 5 min to replace. For some reason the auto stores use a smaller hose and you have to cut to fit.
 
You must log in or register to reply here.
Top Bottom