I'm doing a manual swap with my Cressida and I wanted to k now if the bell housing from a 5M would bolt right up to the 7M. And the clutch/flywheel/pressure plate. Could I use the ones from a 5M as well?
m series is all of the same, as for the bellhousing bolts.
a 7m bolts right in there, you can re-use the stock flywheel on the 5/7m although i would sugest getting atleast a new stock mkiii n/a clutch the pressure plate is rated for a heavier car, more clamp pressure.
and i think the though out fork is the same.
5m6m7m mgte starters are the same. although some say the 7m n/a starter is the highest torqe out put.. ?
I'm not sure if any of you would know, but would the drive shaft from a MA70 work in a Cressida (MX83)? I know the drive shaft I have (automatic) won't work for me.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.