so here it goes, i blew my stock twins and didnt want to swap it out to another set so i decided to go single. i puller out the engine and transmission to change all seals and gaskets as well. along with this, i did a new clutch and arp head studs. the manifold im running is the driftmotion manifold and the xs power 46mm wastegate. the turbo is a masterpower t70. i bought a 3'' v-band downpipe.
i put on the manifold, turbo, and wastegate and my problems start with the v-band downpipe. i do to attatch it to the rear of the turbo and it turns out the downpipe and the wastegate are hitting, causing it to be short about 3'' for the trubo. i will be running open wastegate so would it be a problem to face to open protion towards the manifold? also, if my downpipe does not clear the wastegate, then what should i do? i do not want to downgrade the wastegate at all. any input would be very helpful. thanks in advanced:1zhelp:
i put on the manifold, turbo, and wastegate and my problems start with the v-band downpipe. i do to attatch it to the rear of the turbo and it turns out the downpipe and the wastegate are hitting, causing it to be short about 3'' for the trubo. i will be running open wastegate so would it be a problem to face to open protion towards the manifold? also, if my downpipe does not clear the wastegate, then what should i do? i do not want to downgrade the wastegate at all. any input would be very helpful. thanks in advanced:1zhelp: