1UZ - W58 Adaptor plate

J

jake breyck

Member
Aug 8, 2006
33
0
6
fl
I know a few people around here are thinking about a 1uz swap.

Im working on a few parts to help make that happen a little easyer, heres my first part, 1UZ - W58 adaptor plate. Mounts are also available for 89up thru cjsupra90 with pre89 mounts soon.

also comming soon..
1UZ R154 adaptor plate
1UZ Aluminum Flywheels

Price $250 shipped (48 states, little more elsewhere)
1uz-w58adapter1.jpg


img_1149-900.jpg
 
Last edited:
tturnpaw

tturnpaw

Supra Enthusiast
Feb 10, 2007
412
0
0
Everett, WA
Sweet what's the eta on flywheels and r154 adapters? I'd rather not run a v160 adapter with a 1j bellhousing (waste of money) until these recent threads came up I was about to make one.
 
J

jake breyck

Member
Aug 8, 2006
33
0
6
fl
Very soon, on the R154 adaptors, It took about 3 days to perfect the W adaptor, The R154 adaptor is next on the the list. and the flywheel is next after the R154. Im thinking about 2-3 weeks to be conservitive for both.
 
J

jake breyck

Member
Aug 8, 2006
33
0
6
fl
jmcboost;1232970 said:
Wow Great Job. I would be afraid of blowing up a w-58 on a 1UZ, or does it hold up pretty well? R-154 FTW!
Click to expand...


I trust the W58 over the R154 by a long shot, the R154 might be rated higher and be put on the slightly more powerfull car but the R154 has fatel flaws in its design witch makes it fail prematurally, along with that it costs 14times as much to replace, $50 vs $700 Ive yet to blow up a W on my 450ish hp 7m and now a year with a 1uz, but the 1uz is stock for the moment but a supercharger is in the works.

sweetlikechutny;1233047 said:
:OOOO

I have been waiting for these for a long time!
Click to expand...


Let me work out the exact price ill post the exact price tommrow, It will include the bolts and nuts required as well.

GeneStarWindGSW;1233043 said:
Whats the price range going to be for this?
Click to expand...

See above, also i love that vid in your sig, whats that from?

tturnpaw;1233085 said:
Im awaiting the r154 bell housing adapter and flywheel. Thanks for building them.

Edit: and pre 89 mounts!
Click to expand...

Chris (CJsupra90) has a design for pre 89 mounts, i need to get the drawings from him so i can cut them out for him, its his design so still his product but ill be packageing up kits with his mounts my adaptors and flywheels Ill get on him again about that becouse the mounts could be a day or so away from being made.
 
J

jake breyck

Member
Aug 8, 2006
33
0
6
fl
tturnpaw;1233347 said:
So about the same time I get my 1uz then. Right on. So are the mkiv guys running a v160 or w58 also?
Click to expand...

I havent really followed Mkiv swaps too much but ill pay more attention now that its becomming important to me.
 
J

jake breyck

Member
Aug 8, 2006
33
0
6
fl
well if your starting with an NA mkiv theres really no reason you would have to change to the V160 unless your looking for insane power, the W58 is fine for a 1uz with even boltons and even some boost.
 
Keros

Keros

Canadian Bacon
Mar 16, 2007
825
0
0
Calgary
I'm a bit slow this afternoon... does this adaptor use a M series bellhousing or a JZ series bellhousing?

Realistically, M bellhousings are cheap... people all but give them away. Cheapest a JZ bellhousing I've seen is $350USD
 
J

jake breyck

Member
Aug 8, 2006
33
0
6
fl
Keros;1235077 said:
I'm a bit slow this afternoon... does this adaptor use a M series bellhousing or a JZ series bellhousing?
Click to expand...


neither give your M bellhousing away you wont need it

you use the 1uz bellhousing, the plate goes between the bellhousing and the trans

IMG_0357.jpg
 
J

jake breyck

Member
Aug 8, 2006
33
0
6
fl
GeneStarWindGSW;1235151 said:
When i asked for a price, i was asking about the R154 plate.
sorry i didn't include that
Click to expand...


I dont quite know yet, but im hopeing for around the $350 range, and the R154 plate will work the same way as the W58 plate, uses the 1uz bellhousing,
 
You must log in or register to reply here.
Top Bottom