1jz-gte vaccum line help

[jmvgfd130]

Hey everyone, almost done with my swap. Just running into a snag with these vacuum lines in wondering where they go to. Any help would be appreciated.

 

[njooh]

in first picture to oem map sensor if i remimber right and next by oil stick to oem boost gauge

 

[str8_6]

Having excess vac lines are common when you get the engine. I can't tell where 2 is coming from...if from nothing I would just cap off 2 and 3 for now...either with actual vac caps or jam a small bolt through the lines. Recent 1j i worked on we capped off a few lines.

I'm sure someone will chime in on pic one and four.

 

[seoul4korea]

Here you go:


Also the last photo the very rear one goes to your BOV/Boost pressure sensor for your boost gauge. The one in front of that I don't recall off the top of my head.

 

[jmvgfd130]

Awesome, thanks a lot guys

 

[CRsupraiii]

Pic #2 is for the stock charcoal canister I believe. Personally I used the two in pic #3 for my BOV. The other two (pic #1 and #4) are the same, and for OEM map sensor as mentioned.