Search results

I just completed my 2jzge swap into my 1990 Supra and the engine seems to run smoothly but I am getting excessive vibration at 900 rpm. The entire car vibrates and make noise. It's really annoying. At higher rpms it is much smoother. I tested the engine for compression and it was at 210 on...

I finally was able to start my 2jzge engine today and it seemed to run well other than it is idling at 1400 rpms. I have checked all the vacuum lines and they seem to be fine. I checked my throttle connection and there is nothing preventing the throttle plate from fully closing. I read forums...

I have a 1990 Supra with a 7mge engine. I'm almost embarrassed to ask this question. I'm doing a 2jzge swap and I disconnected my charcoal canister almost a month ago and I can't seem to see where the lower hose/line connects too. I have the vacuum hose and the fuel vent hose but I have...

I'm not sure how to connect my existing 1990 Supra throttle cable to the 2jzge engine I have installed. If anyone can send a picture of how they have done it or provide a good description I would appreciate it. Thanks

I'm not sure how to connect my existing 1990 Supra throttle cable to the 2jzge engine I have installed. If anyone can send a picture of how they have done it or provide a good description I would appreciate it. Thanks

I put my 2jzge engine in my 1990 Supra expecting it to pretty much just drop into place and ran into difficulties. First I thought you could use the engine mounts from the 2jzge engine. They were too high. Then I put on my old engine mounts and the sump was hitting the cross member on the...

I am swapping a 2jzge engine into my 1990 supra. Both engines were NA. I bought the power steering hig pressure hose from driftmotion and then saw that my 2jzge engine has a banjo bolt off the power steering pump and it has the two pronged vacuum switch. If I use the high pressure hose from...

My 1990 supra mge engine finally bit the dust at 274,000 miles. I have decided to do the 2jz ge swap and have purchased the engine and most of the parts I'll need to swap the engine and use my W58 transmission. My JDM engine has a MAP sensor and another sensor that looks like a Lucas air temp...