Search results

Go to junk yard and find a 97-01 Camry with rear spoiler and remove the lamp and cut the body side pigtail also and cut your pigtail off and splice the Camry one in and plug n play Sent from my iPhone using Tapatalk

I have one! 1997-2001 Camry spoiler led light fits it perfectly. Only thing is you have to sway the pigtail and yours seems to be missing since the original lamp Is gone

Why you guys say pita. I did mine and didn't think it was so hard. Or is it cause it goes out on you and hard to see? Zach "zman6127" Prindle

Ahh. And mine is broke. Lol it was just there and now the nipple on top is broke off where this bad line goes Zach "zman6127" Prindle

Also just found this vac hose not connected. The one end goes to the Afm bracket from the charcoal canister and the end I found loose idk what it goes to. Any idea? Zach "zman6127" Prindle

Hey guys looking for some help. After my bhg repair I have had a bad idle. It comes and goes and is better when the a/c is on. My throttle body was crusty and would not clean well enough Ainu bought a used tb and also an isc. Replaced both and it was better for a few days and not its back. What...

Then wth are they talking about Zach "zman6127" Prindle

Yeah I just read only to doing you Have a jdm ecu. Ill leave it alone. People keep asking if I did it to prevent cyl 6 gasket failure Zach "zman6127" Prindle

Well my head is already on so I'd block where the egr lave bolts to the side of the head and at the manifold? Zach "zman6127" Prindle

What is the procedure to eliminating the egr valve and installing block off plate? I just did my head gasket and was wondering if anything had to be done with the egr cooler on the back of the head that you can't access unless the head it off. Zach "zman6127" Prindle

Leaving mostly stock besides intake and exhaust for now. Wheels and tires later. It's a very clean rust free low miles survivor and I wanna keep it that way Zach "zman6127" Prindle

Yeah. Only thing left is getting some exhaust manifold studs to replace broken ones and put her all back together Zach "zman6127" Prindle

Hey guys I caught my 90 gte at the yet of bhg and quit driving it right away. Never overheated. Anyway I ordered OEM hg set from my buddy Toyota Todd at Warsaw Toyota. Took the head to machine shop and they called and said it was warped 5 thousands. Soni had it machined and pressure tested and...

I should be able to be in also Sent from my iPhone using Tapatalk

Ok I will check it out thanks buddy Sent from my iPhone using Tapatalk

Just to make sure I don't need anything else. Sent from my iPhone using Tapatalk

Felpro kit with arps is probly the route I'm going. I'm waiting to get the head off and over to the machine shop this week before ordering parts Sent from my iPhone using Tapatalk

Does anyone know if the cometic head gasket set is a metal hg in the kit! Every site I see that sells it shows a generic pic of a 4cyl head set and doesn't say that it's a metal hg in the kit. I don't wanna buy a head gasket set then spend another $120 or so on a mhg Sent from my iPhone using...

It's staying at the shop and will be worked on after hours. I'm fortunate my boss likes me and is ok with us working after on it and keeping it there where all the techs tools are. I told him anywhere from a couple weeks to a month since we are just working a little at a time. I'm hoping to get...

Yeah it sucks for sure! At least it's still cold here and I don't depend on it for a dd! I also just read in the discussion area that I shouldn't use a mhg if I'm not going to machine the block. And I'm not I'm jut gonna take the head I machine shop. I plan on keeping this one prettying stock...