87 Turbo with 17x8 G35 wheels w/35mm offset 225/55-17 tires, all stock TEMS suspension.
According to online tire calculator:
The 225/55-17's vary from stock: 17in Tire Difference
Sidewall Height: .44 inch taller than stock
Section Width: Same as stock
Overall Diameter...
I'm having a hard time finding a 89-92 3 piece wing in good shape. Can anyone suggest or pm me some "good" sources? I'm a little shy of some of the stuff on ebay. Thanks
as an example...
Upgraded turbo to 57 trim, DDP, 3" exhaust w/turbo muffler (might be some of the problem), K&N Cone filter, and MBC 10-11psi. I haven't dyno'ed it because it feels like it's not worth it at this point. It still has stock headgasket, which is one reason I haven't cranked the boost up yet, but I...
I've tried to set mine at about 10psi, but I am seeing anywhere from 8 to maybe 11 or 12 sometimes. Is that what you guys are seeing with a mbc? I still have stock intake, ic, and ic piping. I've also done the 110 bosch bov upgrade.
Thanks
I can't get away from this drone! :1zhelp: It's killing me:aigo:, I can't carry on a conversation or listen to the radio while driving. I have a 935 motorsports DDP recir), high flow cat, all 3" piping to turbo muffler (3rd one now). The turbo muffler kills airflow, but it's tolerable inside...
Didn't want to reply to a post that was 2 years old so here it is:
48630-14010 LH upper control arm $173.70
48610-14010 RH upper control arm $198.23
Does this sound right? Different prices for the same thing?
Prices came from discounttoyotaparts.com
87 Turbo with power driver seat. I'm doing some autocrossing and track schools and the seat moves forward and backwark about 1/4 or 1/2 inch while driving (hard accel/braking). Needless to say it's a little distracting and I can't find anything broken or out of place on the seat or motors...
935 Motorsports Holiday Sale FREE SHIPPINGSunday, November 30, 2008 3:23 PM
From: "935 Motorsports" <sales@935motorsports.com>Add sender to Contacts To: undisclosed-recipients!!!FREE SHIPPING!!!
This is the online version of black friday. From now until Monday at 5pm PACIFIC, all...
After lots of searching I'm just going to ask...:1zhelp:
I just can't see spending $600+ for toyota side molding that I'm going to paint over. Does anyone have pics of aftermarket side molding and where it came from?
Mine measures 2 1/8" across, so I figure 2" would work ok. Opinions of...
87 Supra. Door locks acting strange. Electric door lock switch inside clicks when depressed, but the locks don't move. If I lock the car from outside (driver's door) with the key it doesn't lock the passenger door, but it unlocks both doors when I unlock it from outside (drivers door) with...
Recent Supra owner wondering if there are any regular meets or anything in the Raleigh area? Did some searching but all the threads I saw were really old..Thanks
Just got a divorced/recir downpipe from 935 motorsports...see any problem driving the car to the local muffler shop (to get new exhaust put on) with just the downpipe on? other than it being loud as hell
Upgraded to 57 trim turbo, 935motorsports divorced (recir) downpipe, 3" exhaust. Everything else stock. Will running the stock airbox hurt anything? Or just lower power levels? Planning on upgrading to apexi or k & n intake and intercooler with hardpiping, just running low on funds.
It's the black plastic cover that runs behind the timing belt pulleys between there and the valve covers? Main harness is inside it. I can't find it on the EPC on searching....many thanks.
Original owner Supra in Central NC. 124,000 miles. Drove it home. It had been sitting for several years (driven a couple times per month), but not much. Straight body. Tail light gaskets were bad and had allowed several inches of water to accumulate in the back of the car and it smelled like...
Just bought an 87 Turbo 5 speed 120k miles. Updating and replacing ALL the old parts, fluids, and preparing have some fun with it. Checked all the head bolts to 75lbs, compression test comes back all around 175-185 psi. Purchased 935 motorsports divorced elbow/downpipe, planning an apexi...
http://www.cygnusx1.net/Supra/Library/EPC/291220/catalog.aspx?F=1902&P=2
Suggestions on where to get the cover that goes on the end of the distributor? Found part # 19121-42010 $3.84, but can't order it online.
Also, I've looked for the OEM part# for the spark plug wireset and bombed...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.