Search results

I have been running my single turbo setup for a couple years now, but I recently developed a leak between the exhaust manifold and the head. I am going to tear it all down and fix it,but I can't find a place to buy the gasket. Anyone know where I could find one? Sent from my ADR6350 using...

My hood has the shakes at low RPMs and some highway speeds. I took the hood insulation off and noticed most of the black goo bonds between the structural and sheet metal of the hood has separated. Since I recently painted my car, I don't want to experiment.... So what kind of product us that...

Well, my harmonic dampener took a shit. I took her up to about 4.5k, felt a little rattle, and heard the scream of my serpentine. Good news: I can't find any collateral damage The bad news: I am at apartment away from any garage that I can use. Is it possible to swap the pulley...

I took the trim off my 87 for prep and paint today. The door trim had double sided tape, so although i took my time getting it off, there is still a new arc to the whole trim. I'm worried even I get it close to straight it will still have some waves when I put it back on. Does anyone have a...

Here is my latest project! I drew up the custom housings on solid works, made them in a SLS machine (rapid prototype machine), painted the whole thing black and the inside of the housing "chrome". I call it a prototype because its not perfect in its fitment, but they work great! The...

I have an 87 with a crappy after market sunroof I would rather replace than try to fix. Can someone measure the hole dimensions for a stock one? I was kinda hoping it was larger than mine so I could make the change.

Just Finished my last Bushings install! It was a lot of work, im gonna say about 80 man hours between my best friend and I. Here is what I put in, the order, and the difference I noticed for anyone's future reference. Everything I had on there was stock and worn out. Bought most of the parts...

I had a hard line break a little while ago, ran it dry in a hurry, it was only a matter of time until my PS started making some noise... Anyways, I found this post: http://alscforum.com/discus/messages/142/16685.html?1251700390 1/2 way down the guy describes the part numbers for a rebuild...

I just got my MR coil-overs in the mail and was wondering about a couple things before install: What initial heights are good to start with? Are adjustments made with the 2 rings or the single ring and threaded body? These dust boots arn't connected top or bottom, so i plan to zip tie the...

I put in some copper NGKs about 30-35k ago and Im wondering if its time for new ones. I am getting a rough start and idle once in a while.

Does anyone know how much space is behind the trim panel above the glove box? Some people put a SAFC there, I just wanted to know if I could flush mount a Wideband or boost controller there.

So I don't know about everyone else, but when I did my 1JZ swap I looked at the cruise control and the 1JZ throttle body and was like "no way this is gonna happen." I ripped the CC out of the car and never thought twice. Turns out its really simple! I measured and cut off a section of the...

My HVAC "auto" feature seems pretty sluggish on the changing air temps in my car. Where is the sensor? I think it needs some cleaning.

My volt gage reads low (has been for 2 years now) and its about time i fix a couple of the small issues with the car. The gage reads at about 12-12.5 volts and drops significantly when the blinkers are used. It has been reading like that ever since I have had the car. I put in a 1JZ, but I...

I have a slight noise coming from my transmission when I have my clutch out. As soon as I push the clutch in, the noise goes away. I can only hear it when I am idleing because if I am driving my exhaust tunes it out. How worried should I be about it? Is it possible for the clutch fork to be...

My dash is doing some wired things. Voltage gauge only showing 12v for instance.(alt is putting out 14.7volts) I checked the resistance between the M1 ground and the chassis and I am getting 10 ohms. I want to see if the wire is bad or the connection. I think there is a diagram of all the...

My voltage gauge dropped down to about 9-10 volts yesterday. So I went out and bought a nice new SC300 alternator. (bolts up and fits nicely btw) After the install, I start my car to double check everything, and the problem is still there. Here is where I am after some frustration: I have...

My passenger window doesn't work at all. I was hoping it was the switches, but it's not. I checked for power at the motor and its there. It looks like you need to replace the hole thing blind since its inside the door. How bad is it to replace?

My radiator has a secondary cooler in it with 1/4" fittings on it. I was wondering if that would make a good power steering cooler. I have been driving it for a couple days with no PS cooler, but I didn't realize how hot that PS fluid gets :aigo: There are pros and cons to running it through...

I am making a custom downpipe and I was wondering if anyone has converted to a screw type O2 sensor. I can't find a flange for the Toyota O2 and I figure there are probably some generic O2 sensors out there to use. Any information would help :)