Recent content by tmsperformance

Good Luck!. As for the wiring mess, just go megasquirt :)

Good stuff congratz!

you double posted here are the answers http://www.supramania.com/forums/showthread.php?195764-Question-plastigauge-loose-clearances-on-mains

For 600whp those clearances are a tad on the tight side. Those power levels Mains: 0.065-0.070mm (0.00255-0.00275") Rods: 0.060-0.065mm (0.00235-0.00255") Some 5w60 or 10w60 and all should be golden. That's coming from my experiences.

My megasquirt is mounted in my glove box. Fits perfect and its hidden.

No I would not worry about the glue. It is there to hold the wires. I can't comment on how these sound with an internal amp via head unit. I would say good as long as you don't crank it all the way up. But then, all internal amp head units have quality issues at or near max output.

Excellent speakers. I had a set of those a long time ago, great sound quality was used with external amplifier and crossover.

Any flat machined metal surfaces I use permatex ultra grey aka hondabond or Toyota FIPG. Use the same on the oil pan.

Nice. How close are you to Uniontown, PA? If close I could help you out

Nice box man, I have 2 just like it. Great price also.

Good point on the emmisions. I don't have them where I live so I don't really worry about it. That is a nice little setup you got there.

You can just unbolt the pump and all the lines and just loop the lines filled with fluid like I did. Its a bit hard to turn, but if all your previous cars had no power steering its all good.

I'll try to get my ms paint skills up and draw something up to show you. I have 2 catch cans 2 inlets and 1 outlet on each. Each can has staggered 45* plates welded on the inside acting as baffles. In between them is the metal scrubbing pads. The inlets are on the top right of the can. The...

Appears to be :)

Problem solved. Just wondering how often do you change the fluid?