Recent content by Supraholic

I dont work for marketing and I can't care less..

no additives other than supersyn in EP grade. The regular M1 has a correction that is derived from base lube stock.

Well, I happend to be a chemical engineer working for XOM. Yeah.. i dont know thing about technical side of oil... humm.. you can believe what you want..

check your fuel pressure regulator and fuel pressure damper for leaks. My fuel pressure damper (the one close to the firewall on the fuel rail) leaked and I smelled fuel in the cabin...

Mobil-1 EP (extended performance) version is fully synthetic. It is not made in the refinery lube plant. All of it is made it in the ExxonMobil Beaumont refinery chemical plant. It is not based on fossil fules. 100% of it is man made. Now, the majority of the regular Mobil-1 is...

Mobil-1 is just a champion labs product.. no added benefit as the Mobil-1 Oil. Stick with Toyota. http://minimopar.knizefamily.net/oilfilterstudy.html#mobil1

I bought a can of water wetter last year.. still not brave enough to put it into my coolent.. if car does not overheat.. why mess with a system thats not broken?

this may be a far stretch.. but did you check the fuel pressure regulator? could it be that the fpr diaphram is broken and u are leaking fuel into manifold through the vacuumm lines ? that would prevent from starting...

I get 23 mpg combined. Lexus AFM with 550s, AFPR, WB pump

Atleast it wasnt a hit and run while your car was parked!! then, it will be all your dime..

I second that... this is exactly what I did. Still running with the rubber though...

Pulling the tranny with jack stands is two person job.. Also, need lots of good tools.... Good luck man.. It took me two weeks after work to get this done....

From reading the postings, it seems real hard to replace these things... I am thinking to stay with my suprastick for now...

I found this, http://cgi.ebay.com/ebaymotors/TOYOTA-Supra-1986-to-1992-Hatchback-Lift-Supports_W0QQcmdZViewItemQQcategoryZ33656QQihZ013QQitemZ230063814654QQrdZ1 or Item number: 230063814654 will this fit right in our cars? anyone bought this brand ? seems cheaper than toyota.. since...

My 87T made a whining noise from the bottom.. I checked the center bearing.. I could move the driveshaft by hand, if I shake it.. thought the bearing is bad.. bought new one from Champion for $$$, replaced it, and the noise stayed same as before.. then, I found out it was the pinion bearing in...