Recent content by Nucleon

Toyota part number is 90116-10169 for the studs and 90179-10094 for the nuts. Be sure to have new manifold gaskets.

Hi guys, I've never read about this so maybe this could be new to you. I was just replacing the rubber hoses that connect the T-Intake pipe with the turbo intake pipes. The stock hose is a bilayer hose and with time passing by the inner layer caved in, because of the vacuum in this area...

ARC made some for JZA70 but they are discontinued now. because of the thin aluminium material it will give you an incomparable intake sound. I have one for sale if someone is interessted.

Yes, they have a different lenght. MA70 is 280mm and JZA70 is 315mm.

For a proper compression check, the engine must be at operation temperature! The numbers from a cold engine are often useless.

I also have a set for sale, but I'm from Germany. So they are USD 200 shipped without insurance, add $20 for insurance. It's not a bargain, but I've seen some going for much more in the us.

You still need the resistor pack. But I think JDM 2JZ 440s are much better, expecially since you don't need a top feed fuel rail.

Why marry a mature women, when you can have her daughter :biggrinki

If you're going for that much power, it's best to get a triple-plate clutch. Carbon is still very drivable. Only that will last like a normal clutch.

It's similar to the Blitz Access and Mine's VX-ROM ECUs. Normaly it's programmed for raised boost on stock twins, exhaust, air filter, intercooler. It is possible to rewrite it at G-Zone, so if the engine is heavily tuned, the ECU could be reprogrammed to that new specs.

Since the oil ist watercooled also. It is important to have a working radiator. Koyo is the best for hydrofan setup. But decide on yourself, if you take the small copper radiator or the bigger alumi-radiator.

At least I can give you the ECU Voltage Pinout for GA70 made Aug. 88 on. See pics.

Black = Ground Red = 12V IG+ Green & White = SP The the pics attached

At how much boost do you hit FC? The 2JZ trick will just raise FC, not eliminate it.