Recent content by NickG21

Havent had time to work on the car as much as ive wanted to the past few month. I finally put the engine into the car. Got mostly everything connect as far as vacuum lines, heater hoses ect. Picture is from right after i dropped it in When i was about to install the drive line to the...

Thats how all the guides said to do it and it just seemed like a pain to do it that way. Thanks guys I should have a lot done here in the next few weeks depending on my schedule

Got most of my engine together now. Put the engine on the floor and installed the new flywheel, clutch and pressure plate. Turbo, exhasut manifod and intake manifold are installed new arp flywheel bolts as well I didnt like the way a lot of people showed for installing the clutch...

Been working on the supra here and there trying to get some things done while the engine is out, so i Decided to replace the steering rack as well. Forgot to post a picture of my coilovers. Dont mind the rusty break rotors still trying to decide what route i want to go for breaks

Its been a while but plans changed with the original shell. It has a bent frame didn't want to deal with it so i bought 1990 NA targa for $1500 it ran and drove after i did a little tune up on it. Paint wasn't the best at first it was almost pink. I washed buffed and waxed the car mostly...

Here is the forward facing stock intake that came with my parts car sorry it took so long to take a picture. Not sure if this is even capable of being used

More interior updates.. I know boring! Anyways i took all the interior out of my car to swap the grey in and holy crap was that thing dirty underneath. So i took the day and washed it out. I would recommend to anyone who hasn't taken their interior out to check. Lots of dirt and stink under...

I'll get a closer picture of it later tonight when I'm off work.. I have a pretty good memory of how to put things back together most of the time if not it doesn't take me long to figure it out. As far as part by part I quess I phrased that wrong I'll be doing it all in one day so I should be...

luckily the other interior is still in so im just going to replace each part one by one. hopefully this way i makes it easier. I feel you on the not taking enough pictures part. such a hassle though

Got the parts car in the garage to begin tear down. To make it as easy as possible for re assembly i bagged and labeled all the bolts. As you can see it has a ffim welded onto the stock intake manifold, not sure how that works.. luckily i have another one. Hooked up to the engine hoist...

I bought my first supra at the beginning of this year. Originally i was going to do a stock rebuild but that ended quick and my search for power has began.I started tearing into things a while back and i don't have many pictures of all that so ill try to catch everything up to where im at now...

how much lower do those coils allow you to go?