When I posted this I knew the board's resident douchebag would reply with something proving that he has no reading comprehension as usual.
I'll say it so you can understand - derp, the engine's not in the car derp, rather than trying to guesstimate based on where the engine mount is, I figured...
Hey all, hopefully someone has done this before and knows - I'm putting my engine (7m) together on the stand and the exhaust manifold i'm using is forcing me to add a big spacer to keep the compressor housing from hitting the manifold but the angle of the T4 flange has it pushing the turbo out...
Today I pulled the Supra into the garage to start swapping out my smoky smoky turbo...
(pictures: turbo seals may have gone but I still won the 2-day trophy for my class :icon_bigg )
That's true, and that's my fault for not listing all of the mods I have. I was just thinking that it would be obvious that I bypassed the resistor pack but I should have mentioned it. Really I was just bored and wanted to talk about how I found an injector with more than double its specified...
Wow, and here's why I just lurk here and don't post.
Of course I know how to install the injectors, they've been installed for years and working fine, with the proper wires tied together.
Nick is more interested in arguing something completely different than providing anything useful at...
The gradual change was most definitely due to the injector getting worse as time went by, I'm guessing if I keep ignoring it then the resistance will climb until it's completely dead.
When you install the high impedance injectors on the 7M you remove the resistor pack. Yes, older...
No, that's not it. What do you even mean by "wrong injectors" ? Is anything but the stock 440's is wrong? The injectors have worked for years, not to mention they're the same 550's that many many 7M owners have upgraded to...
Anyway, I borrowed a 660cc injector from my buddy who has a mkiv...
Hey, so I've been chasing a misfire, occurs at idle, not on every rev, randomly. Started a few months ago and has gotten worse over time to the point where now I can't ignore it anymore.
Spark/coil is good.
Compression is good (170-180psi in every cylinder).
A/F (at idle) stays around 14.7-15...
Full Throttle is still answering their phone? I found them to be way less than helpful in the past and now their site seems to get about zero updates.
Anyway, nothing has really changed with it in the past few years since the last update. What's wrong with using the older information you've...
If I could change one thing about my Tanabe exhaust it would be to have a smaller tip - People are always like "car looks good, get rid of that coffee can" and then I get angry and mean. I don't want to change exhaust tips tho because I like the "Tanabe Hyper Medallion..." etching on it...
Ha! I spent years looking for the Tanabe exhaust at a price that wouldn't kill me, finally got this one from a member here about 2 years ago... I love it, it's my favorite mod on my car - the other exhausts I've tried (generic and Raptor Racing) were so loud and annoying, the Tanabe is awesome.
Thanks!
Yep, sorta custom, I got this body kit for free years ago but thought it was too ugly to use. Then when I was getting ready to repaint I decided the lower part of my front bumper was beat so I cut it up and fiberglassed them together. Also cut up/fiberglassed the side-skirts a little...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.