Recent content by ae86ma70

I have the 30-1110, and I am pretty sure I have it configured the same way.

Yes, but it halps to have the 91/92 door panels as well, as they have larger grilles for the 6.5" speakers.

5". Not 5.25", but 5". The selection is very limited. If you are referring to the rear pillars, they are 3.5".

So, didja ever get your harness?

I'm curious about the differences in fenders. Anyone have a picture comparing the two? Or a thread for reference?

I am sorry, but even a couple of months seems like too long. Maybe they should charge a little more and hire some help. I mean, even if you were building one from scratch it shouldn't take more than a couple of weeks...

Also, no such thing as an 86 Turbo. If your stereo is not getting power, check fuses. If you're not sure how to do that, pay a professional.

Looks right. Hal can tell us for sure, or I'll go look at mine after it stops raining.

Here's the diagram you requested. It is for a late model MKIII, but it should do the trick. More diagrams here: http://www.cygnusx1.net/Supra/Library/TEWD/MK3/ Link to original diagram

You'll pay more to have someone clean up the mess made by the previous owner. I would post a "want to buy" ad and get someone to send you the factory stereo wiring connector and wire it in, then go to wal-mart and buy the toyota harness adapter. Thern you can swap radios till the cows come...

Well, I'm glad that you posted that anyway, because I'm always looking for places to buy those sorts of things from. Your efforts to locate the plug will be appreciated. WTB ad located here.

I don't see anything on that page that looks like what I need, either. Thanks to everyone for the suggestions thus far, but I'd like to replace the connector with one that is the same as the original. The connector pictured in the left thumbnail in my above post has no way to lock onto my TPS...

Can I use a newer style TPS and just recalibrate the sensor in the EMS software without having to re-tune my fuel maps?

Yeah, I tried looking into it with several different light sources and didn't have much luck. I killed two of the locks. ---------- Post added at 08:14 PM ---------- Previous post was at 08:05 PM ---------- The TPS connector in the link is different from mine. Mine is on the right.

Well, I figured it out, but it cost me a TPS connector housing. Anyone have a source for these? I bought a used TPS to get the one I just destroyed.