Recent content by 865whitemk3

i have an 86.5 and it has a hard time starting when it is cold. i bought a new tps today. no luck. it cranks and runs great when the engine is cold, or the outside temperature is less than 60 degrees it gives me a hard time. Please help me, I am, getting frustrated wht this car. I love it...

Ok 87 supra has trouble starting when it it is cold. Today the temperature was below 65 and it would not start. When the engine is warm it cranks right up, but when it is cold it is hard to start if it starts at all. I replaced the throttle position sensor, and that didn't do anything. What...

Thanks guys, i don't know what I did, but I pulled off the t/b, and pulled all the wires, and put it back in, and by god's grace the thing started, and ran like a champ! By the way is is non turbo, i am new to the supra, got it last december with a blown motor and bought and put a new(er) motor...

:icon_conf i had a problem with my tps a couple months ago. It started missing real bad today, so i played with the sensor, and now it won't start. If the sensor is unplugged, from the harness it trys to start the same way, even thoush it is plugged in. Do does anybody think the sensor is the...

played with the tps and it fired right up, thanks a bunch

:mad: Ok, after I ran the car pretty good, it started to idle bad/die, well, i took off the intake, and there was a hole in it that i later found. After taking the plug wires off to inspect the plugs, i put everything back together, and fixed the hole in the intake resonater. Car won't start...

ok, im gonna come clean, after installed the motor to this car i was testing the power and other things and i hooked a battery up to the terminals under the hood wrong, and i blew a couple visible fuses under the hood and in the cabin fuse box, they have all been replaced, and nothing. My...

Ok I tried pulling the fuses for the ignition...no luck, i have no clue how to get to the relays. When the key is in the ignition the dinger is going, when i remove the key it stops, could the igintion still be defective? If i try to manually push the lock lever from inside it dosen't want to...

Ill make this quick, i have never been able to lock the doors in my 86.5. Not manually with the key or with the lock button. Is there a way to disable the power lock, so i can least get my doors locked? If not what might be wrong