Recent content by 83restomod

U have to call up. Anyone have a link to the cps mod to a trigger wheel set up? I remember seeing a thread a while ago about pulling out the cps wheel and 3 pick ups and installing a single pick up for use with mega squirt or other ems

I would like to get rid of the cps for numerous reasons. if u have an Aem u know what those are. The ATI damper seems to be one option if they would reproduce it again. Still looking for a bolt on wheel kit mounted to the cam gear. Also the v2 is available as I just ordered one from Titan :)

I'm going Aem v2 ems on my 7mgte and id ike to do a trigger wheel set up similar to what dwane has on his white mk3. Does anyone of our venders/ members offer a bracket or kit for such a set up? Thanks

called precision turbo today. -4 feed and -10 drain, oil restrictor is built into the DBB turbos.

i have a PT67 DBB and would like to know what size oil feed and return line is recomended. also if a oil restrictor is needed, i doubt it as i use VR-1 20w-50 and pressures are good.

can injectors be damaged due to a starvation of fuel? say u had an incorrect micron fuel filter before your fuel pump the pump was screaming loud trying to work hard to get the fuel past this dumb filter, engine ran but very poorly (really lean obviously). could this cause pre-mature...

the autozone(s) in central jersey do not carry the german castrol oil. other then those stores who else is known to have it? i found this site through google search but i dont know if it is reputable. http://matrixsyntheticoils.com/store/euro_super_savers_corner_german_castrol.html#402...

awsome build. what type (brand) of paint products are u using on the engine bay and bits? looks great.

car looks like its coming along nicely. is that COP system still waste spark? im looking into doing a COP soon. thanks

car looks/sounds good Wade. agree with above, any numbers?

this unit was offered to me rather cheap. im currently running a MAFT gen 1. i know the greddy can do timing but is it compatable to run both piggybacks? ie use the MAFT just for its sensor and use the greddy for fuel, timing, etc. which one needs to be wired closer to the ECU? is it even...

o i see. you came here looking for a 1JZ as per your username. nicccceeee :biglaugh:

thank you guys. ill be making a Wanted thread for some injectors.

if they all are flow tested that dosnt make them good? im not an injector pro.

we all know their were countless issues with these. i spoke to Tom at TLF performance which is who i baught them off of over a year ago. he said he will take them back, flow test them, and if any are off of the 550cc rating then he will take other injectors from his stock and match them up until...