Search results

Hey guys! I wanted to post something that my crew and I have been working tirelessly on. After years of dreaming about doing it, I finally took the initiative with the help of some tremendously talented friends, and created my own webseries about cars called Gearhead Garage. I'm an actor as...

Setup: 2JZ-GE-T with 7M ECU and Electronics. Maybe at 15,000 miles. Symptom: Sputter on start up that stays all throughout the RPM range. (well at least to 3,500) This is exactly the issue that caused me to stop driving it over the summer except then it would go in and out. I...

Setup info: 2JZ-GE-T with 7M ECU/Harness. SAFC Neo (freshly reflashed by Apexi). Circumstance: I parked the car in early June as I was having what I believe to be a Karmen issue. I think the SAFC Neo might have been the culprit. However... For some stupid reason I left the battery connect...

The issue is that I keep throwing code 31 for AFM Signal. First time around I found a used one, put it in and it ran well for two months. Then at the end of February it did the same thing. The car hasn't moved since. What happens with the car when it throws the code is that it will pin rich on...

Every so often my car develops a 10.0 reading on my AEM AFR gauge. The engine stutters and every so often dies. But if I accelerate it acts normal and AFR readings read normal as well until I go to idle again or just try to lightly push the gas pedal to maintain speed. To "fix" it I typically...

Well in November after I got done replacing my clutch, someone backed into me and cracked one of my turn signals. So included in my estimate was the price for a new set of these turn signals. I only know of one website that sells them however the body shop, nor myself could ever get a hold of...

Well last night after somewhat of a spirited launch (4K RPM slipped, NOT dumped) the clutch stopped engaging altogether. I haven't had any issues with the clutch before this. The pedal still has pressure however the clutch will not engage or disengage. So today I jacked it up, took the...

Setup info: Rebuilt the 2JZ-GE in August and have put around 10,000 miles on it since. Replaced all seals, bearings and piston rings. Well about 8 months ago my car started to smoke like a freight train after it had been running for 3 minutes or so on cold start. After the smoking started it...

I was on the way to work yesterday and right as I got on the freeway we both kind of started driving a little faster than traffic, maybe 70 or so. We were both side by side and he did a quick pull for like 2 seconds just to show that he wanted to run. BTW I love Evo's, and I figure most of...

This was quite the eventful weekend... I finally dyno'd my setup after about 10,000 miles of daily driving on Saturday. And on Sunday I was able to drive on a quarter mile track for the first time... Ever, come to think of it. All of these runs were done at 10PSI. As always, comments...

Hey guys! Well I finally got around to dynoing my setup and I wasn't too dissatisfied at all... At 10 PSI I put down 374HP and 324TQ and pulled a 13.7 at the track with full weight. But I'm here for you guys to critique my run and offer any suggestions you guys may have for me...

How hard would this be? I ask because HPF is running some clearance special on the pre 89 AEM EMS for like 12XX dollars but the post 89 is 17XX. Could I buy the pre89 AEM EMS then depin my post 89 ecu clip and repin it into a pre 89 ECU clip? Are there jumper harness available for this...

I've got some bad video of the Viper and a couple other cars. The sound on my camera just isn't that great... Despite the weather, this meet was pretty fun. Me and my friend in the KA-T 240SX left a little early. We both dyno'd and were both surprised at our numbers. T61 2JZ MK3: 374HP...

Just some autocross action on old stock shocks, ST springs and bald tires :-) My first time participating in an autocross and it was just a blast. Even though I could have driven a lot better I was still very happy with a 6 second improvement from my first time. (3 runs total) I paid for 6...

Nothing too special just my car doing some 2nd to 3rd gear pulls and one 1st gear pull. Dirty car, dirty engine bay and a slow car. :3d_frown: These pulls were only at 9.14 PSI... At least it sounds decent! :) Enjoy! http://www.youtube.com/watch?v=drS7jdWHOR0 Added another video due to...

On warm up after its hit a little over the C mark on the temp gauge it starts to smoke a mixture of white/blue smoke comes out and it keeps coming out until its COMPLETELY at operating temperature. It's bad sometimes. Like billows of smoke. But after its at opp temp it barely smokes at all. On...

Cliffs: Battery(Supposedly) and alternator tested fine and I just redid the wiring however the battery is still not holding charge. Well about 2 weeks ago my car was acting really strange. My afrs on idle would be around 17-18 and my boost gauge kept powering on and off so I figured battery...

I'd love to have a meet somewhere near here whether that be Louisville or Indianapolis or something. Anything going on? -Nick-

Now the car wont start. I go to crank it, it putters up to maybe 650 RPMs for about a quarter of a second and dies. Threw the igniter code, I had one laying around, replaced it, and still the same thing happens. Bad ECU? Im in serious trouble as I'm supposed to make a long drive...

I really hate to make a thread like this but I'm crunched for time and in the middle of doing some other major work right now. What wires can I tie an IGN signal wire into? The IGN fuse is where I'm pulling power for my Uego and the ground is just a basic ground. I've got the wires for the...