Search results

So I just bypassed the factory fuel pump relay and resistor today and was wanting to show fellow supra owners how I done it, and if any of you have any better options to improve the install, please let me know. I'm also relocating the redtop to the rear and was hoping to have some input on how...

hey guys and girls! about to start my 1J swap into a 87 turbo, I was thinking about not cutting into the harness but making a hole into the firewall on the driver side. I figured it would help two things, 1, not cutting into harnees to prevent future possible problems. 2, It would look cleaner...

here is the video with some questions. thanks for taking the time to watch! :1zhelp::1zhelp: Brandon https://youtu.be/jZz6aJCpEVc

Hey guys, so me and my friend picked up a 87 turbo a couple of days ago for a dd. And one thing that is bothering me is that the people before us did the fuel pump mod on a factory fuel pump. I saw it and asked them if it had a walbro in it and they said it was the factory one:yikes: The...

hey guys, my name is brandon and i have a couple of questions. I have a 1988 supra 7mgte. Bought the car with a bhg so i got a built 7m to replace it. It was just a head and block with wiesco pistons, hks mhg, arp studs and headwork. So i swaped everything over to the new motor about a year and...

So i have the funds to order my 1jzgte! But i can not find the right place or the right motor. Is it hard to find one that has come out of a mk3 in japan?? i want to find one that has a r154 5speed with the motor and full harness and ecu. If they come out of the sc's they have a ext on the...

Ok, so over the winter i put a electric fan on my 88 turbo. I now know it is not a good idea because it is running a bit warmer (summer time) so i put my stock fan back on. So here is my question....if i want to run a electric fan or fans what is the best route?? I know stock is best from what i...

Ok, so i have a 88 supra 7mgte and every since i built the car about a year ago i have had this problem. Here is my day, i start the car up in the morning and it runs fine. Once it has warmed up and i turn it off, it has problems trying to start. It misses bad and its hard to rev, but if i keep...

will the ge cam seals work for gte??? my cam seals are leaking and i have a set of toyota cam seals for a 7mge thanks, brandon

I have been looking for the thread about doing the LED'S for the gauges and the air controls. I cant find it anymore??? Can someone help me out?? There was part numbers for the LED'S and pics!! THANKS, BRANDON

So i just had to pull my trans because of my flywheel bolts backed off:: angry :: People are telling me to use threadlock, (the red kind) this time and they will not back off. Is this the right stuff to use?? thanks for the help! brandon

in the TSRM is the lower suspension arm on the rear passenger side called a inner tie rod or the out??? i messed up the threads on the ball joint and now it keeps spinning on me and i cant get it on. so now i have advance auto getting the part for me and they keep asking if it is the inner or...

guys i need help:1zhelp: the little ball joint looking thing on the lower suspension arm that bolts to the hub assembly, how do you get it on??? i knock it with a hammer to get it off, the tsrm says use a sst to remove it so do you use the same tool to install it?? thanks for the help!!

i have a 88 turbo and my rear hub is is bad...i have been trying to find one everywhere but i just cant:3d_frown:...but today i found one 20 miles from me for 40bucks but it is for a 89+, will that still work for a 88?? thanks for the help!!

hey guys, so i think my passenger side rear wheel bearing is shot, its loud and i can move the tire back and forth...im looking at the tsrm on how to do this but im just not understanding it at all. does someone have a better link on how to replace it and where would you guys get the wheel...

so i went to start my car for the first time today after my build and no luck:3d_frown:.......everything seems good but no fuel. this is my first time cranking the car, the guy i bought it from drove it home and parked it for like 3 years because of a blown h/g....so i turn the key on and you...

so i have a 88 7mgte and i am trying to bolt my trans back up, i dont have a lift:: angry ::..i have my car up on 4 stands, i lifted the motor from the front to tilt the back down but i still cant get the trans axle to slide in...the top of the bell housing is hitting the car....do you guys have...

i bought a new harness from toyota for my 88 gte...and i messed up, i cant figure out witch way the harness went for the inj...grey brown grey brown OR brown grey brown grey....i have searched in my bible but cant find it.....can someone give me a link please....thanks for your time

there was a link awhile back that i cant find....it was a 7mgte to a 2jzgte...someone wrote it and it had a list of stuff that you would need and prices...im shure its on here somewhere in front of me but i cant find it...thanks for your help!

the bracket that holds the oil filter on the side of the block will not come off....it has a 24mm bolt that is holding it on it looks like....ive broke 2 of my ratches...one a snap on:: angry ::....i guess my ? is that is that bolt supose to come off???...im putting my new motor in tonight but...