I got a set of low imp 550's from an rx7.
They wouldnt fit but I heard I could just shave them down a bit. Got them all to fit.
I am not sure if im correct but I also heard something about installing resistors, is this true or am I done?
1989 Camaro RS 305TBI. 5.0
$100 bucks because of a bad steering box and radiator!
big project but domestic parts are so cheap.
I already replaced the steering box for a quick ratio, it fixed the erratic pulling of the steering wheel, but now when i loosen my grip on the steering wheel...
Can someone revise this? I am going megasquirt next month and will also be getting my ffim flanged to fit what I deleted but I need a quick fix to get my car over to my new house
Ok I made this diagram
from this
to this
Explained:
My bvsv is broken, so I will be excluding...
my sister has a 1994? lexus gs300 with a 2jzge. Her car started trembling and stuttering. She came home and i pulled the codes. It came up with a code 25 and 26. Im pretty sure its not possible to run rich and lean at the same time, so I pulled the efi fuse for a few minutes and checked again...
I got my FFIM today (thanks vansupra) Its a sethron longrunner exactly like this one here with the same throttlebody.
A few things that puzzle me are:
There are 2 coolant (i think) hoses that go to the old throttle body and isc, since i no longer have either, what do i do with them...
I have been researching for days now. I want to take on this big project but afraid my lack of skills will get in the way. I want to remove my non working a/c and put in something that would be more useful on the crankshaft! 7MGZTE.... I am still thinking if I should go through with this or not...
Ok I lost my key, I have been reading through a few threads and I heard I can get the key made for the code on the passenger side lock. Will I have to have a title to my car with this code or can I just get the key made?
I called a locksmith and he told me 120 for the key, 40 for calling him...
When I bought my car, I had a code 52. I felt under there and noticed I was completely missing one of the sensors and plug. I THOUGHT this was the knock sensor close to the starter I was missing.
I had an extra knock sensor from my old n/a so threw that in there, I found the plug hanging...
I have been studying oil for about 3 hours today in this section and countless hours over the past week.
When I did an oil change the other day, I put in pennzoil platinum 5w20, a fellow member told me it was too thin for an old engine and recommended a 10w30
I then checked the oil...
This is not a "help me, what do I do next" thread.
Ok I did all of my basic maintenance except for my sparkplugs, waiting on new coils. I did an auto to manual swap because the bad condition the tranny was in. I decided to write down a few things I have discovered while under the car!
First...
I was looking at my 1990 targa top, 7mgte, abs, tems supra and noticed something wierd!
My vin code under the hood is ma70-***7064
My vin code around the rest of my car (doors, dash, everywhere else) says jt2ma71n4l0***064.
I've never looked into vin codes and how they are made for each...
I just did an oil and filter change this morning, hit my intake with a little carb cleaner and a new air filter, changed my tranny fluid last night, tightened up my bypass valve because of a boost leak, pulled off my lower intercooler hose and oil over the walls of the intercooler!
I searched with little luck. this is a very noob question so sorry in advance!
Ok scenario: just finished my auto to manual swap perfectly without any complictaions besides locating parts.
I was unsure of how much fluid was in there so I opened up the drain and some poured on me so I...
ok I went online and searched every place I can think of for some loctite 262 but nowhere, I searched every autozone in san diego, nowhere.
I found some "permatex high strength threadlocker RED" but I dunno if this would be strong enough, anyone have any input? personal experiences?
The...
Ok, I am doing an auto to manual swap, this may sound like a pretty dumb question to most but i come from an n/a 5 speed so this turbo auto is kinda confusing and I searched every keyword I can think of.
Ok so I pulled my auto, while I was unbolting a hardline I didnt realize that when I was...
I am removing my auto tranny for my auto to manual conversion, I removed fluids, driveshafts, supported it with a jack, removed wiring, shifter and bellhousing bolts, it came loose and i can see the inside but i cant seem to pull it all the way off. Did I forget to unbolt something?
btw, I...
Ok I just picked up my new 1990 grey targa yesterday. one of the problems it is having is that the battery keeps dying.
I swapped the battery out with a battery I am pretty sure is still good. I charged it up for a good 3 hours and it worked all day yesterday. It started up perfectly fine in...
hello, i am doing a n/a to t swap
i pulled my engine with tranny out perfectly and set my engine aside for awhile
my stepdad wanted to help and he wouldnt stop bugging me about letting him help so i finally told him to strip down my ge so i can swap over the interchangeable parts
i go...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.