Search results

  1. trofimovich

    Crank pulley broke!!!

    A pulley made from a single piece of aluminum, without a damper to dampen vibrations, can do a disservice. For some it works, for others it doesn't. To unscrew the pulley bolt, you need to hold the pulley itself so that the torque is not transmitted to the crankshaft. You need to make a device...
  2. trofimovich

    Crank pulley broke!!!

    There is a reason to change it to ATI.
  3. trofimovich

    throttle body

    http://www.cygnusx1.net/Supra/Library/TSRM/MK3/manual.aspx?S=FI&P=36 It is suitable? http://www.cygnusx1.net/Supra/Library/TSRM/MK3/manual.aspx?S=FI&P=55
  4. trofimovich

    7M-GTE oil pump options in 2024

    90915-YZZB2 could it be better?
  5. trofimovich

    Crankshaft inspection form.

    TSRM. I studied well. Yes, thanks. I just thought that in the states, various engine repair shops are more common and there are ready-made forms for filling out. They turn out to be more practical or something, well thought out. Yesterday I already made a sketch of a homemade form for 7m. So I...
  6. trofimovich

    Crankshaft inspection form.

    Well, or please tell me where, on what Internet site, I can download and print such forms? If anyone knows.There's something I can't find.
  7. trofimovich

    Crankshaft inspection form.

    Guys, does anyone have printable forms for inspecting the crankshaft and the engine in general? You may have seen them from those who repair engines. Can you send it? I have quite a few spare parts accumulated and I need to carry out an audit and attach a sheet of paper with measurements to each...
  8. trofimovich

    7M-GE bored out .020, What is the new head gasket bore size I can go with.

    Look for the gasket by thickness, not diameter. The piston does not extend above the edge of the block.
  9. trofimovich

    ForcedTorque's Slick/Quick Build

    Did I understand correctly, Ekumaster employees tuned their ECU on the factory 7mgte engine? The fact is that there are no tuners in my environment and I want to transfer my factory 7M to ECU Motek M48 and I need base maps. It turns out I can use ECUmaster cards on my motor, but in another ECU...
  10. trofimovich

    ForcedTorque's Slick/Quick Build

    Do you have a factory engine?Are basemaps from ekumaster suitable for factory engines?
  11. trofimovich

    Does 7M-GE stock crank pulley need replacement with age or mileage?

    If the factory pulley has not delaminated in the rubber layer, then you can continue driving. I bought the ATI pulley for myself because I’m going to install a dry sump.
  12. trofimovich

    Project: Git'R driving...a VERY short build

    Yes, I'm talking about private workshops.
  13. trofimovich

    What did you do to your supra today? Pics

    We made a ventilation valve.
  14. trofimovich

    Project: Git'R driving...a VERY short build

    Do you have any private workshops there?
  15. trofimovich

    Project: Git'R driving...a VERY short build

    It's a pity.Probably the back panel is still bent.
  16. trofimovich

    7M Torque Plate

    You need to load the places where the cylinder head is screwed to the cylinder block. What difference does it make to the threads in the cylinder block if it is an aluminum solid plate or an old reamed cylinder head? Threading the studs will move the cylinder wall by 0.02mm :)
  17. trofimovich

    Standalone Questions - Which to Buy

    Do you have a factory engine on a St26 turbine and 440cc injectors?
  18. trofimovich

    7M Torque Plate

    The old block head does not fit? Drill holes in the cylinders.
  19. trofimovich

    7MGTE CPS timing

    Can you put the crankshaft sensor on the crankshaft pulley, and leave the camshaft position in the cps? What ecu do you have?