Search results

  1. Dave 1jz

    Oil from exhaust after forged rebuild + tune

    First of all run in the engine so that the pistons rings seat properly. If this does not help and if the spark plugs have the correct color, i would take a closer look at the turbo (check if the turbine wheel isn't wet with oil or black, should be grey-ish)
  2. Dave 1jz

    Diff rebuild by "pro" not going well

    Ok, i don't know my reading exactly anymore, but 25 in lb seems fine.
  3. Dave 1jz

    Diff rebuild by "pro" not going well

    Not saying my situation is similar to your problem, but recently i replaced the pinion bearings (with crush sleeve) due to a slightly too high preload on the solid spacer and perhaps vibrations of the propeller shaft. During installation of the rebuild diff i found that the propeller shaft...
  4. Dave 1jz

    Diff rebuild by "pro" not going well

    Very nice informative topic. I also rebuild my own diffs. Piratip already gave much useful information. My experience with solid spacer is not great. A crush sleeve works very accurate and worry free. For setting pinion depth i honed out a old top bearing, so i can remove the shaft easily...
  5. Dave 1jz

    Polyurethane subframe bushings for the MA70 Supra

    Thats good news! Now we have the full kit, very nice!
  6. Dave 1jz

    Polyurethane subframe bushings for the MA70 Supra

    Yes, i have that kit already, but i mean for the subframe, the big bushes which bolt to the body
  7. Dave 1jz

    Polyurethane subframe bushings for the MA70 Supra

    Are the bushings still available? Front and Rear. The raptor site is under construction.
  8. Dave 1jz

    Introducing myself!

    I figured that much lol, i,ll do my best, usually im working on the car without camera in my hands!!! But i will keep history, and open a build up thread!
  9. Dave 1jz

    Introducing myself!

    Hi, my name is Dave, living in the Netherlands, currently im rebuilding my 88 turbo (1jz) from ground up, which is a FTW big project, supramania gives a lot of info and details, this helps!! When i find the time i will open a build thread! greetings Dave