I am replacing the head gasket on my own for the first time and was hoping someone in the Yakima area would want to help? I'll supply the beer! so far I have it down to just doing the head stud nuts (which are a bitch!) and mostly am just scared i'll do something wrong putting it back together. Let me know if you're interested!
Yakima WA Supra lovers!
- Thread starter supraboy
- Start date
I wish I could help but I am in Texas lol just tag and bag EVERYTHING it will take a bit longer doing this but when you start putting it back together you know exactly how many bolts and nuts in what section, on what part, etc. it speeds it up tremendously I also drew a little picture of the part and location on my tags. Be careful when you remove the stock head bolts you can easily strip them as I did with mine and I had to buy a larger size hex bit and grind it down enough to hammer it in and break it loose.
Im in the same situation but thats why its a project, this is my first time taking an engine appart but what I recommend is us alot of ziplock bags good luck to you