Threaded 02 sensor for 1JZ?

[87supramario]

Just wondering if anybody has a NGK part number for a screw on 3 wire sensor that can easily be swapped with the factory plug. I've seen information somewhere that the Bosh 13913 works great when you swap the plugs but unfortunately I can't find a local source for Bosh. I have a threaded 02 Y-pipe.

Anybody have experience with NGK 22014?

 

[hvyman]

iirc you can use one from an older mustang. should be able to search the year and then cross reference and get ntk or look on rock auto.

 

[kornfedmk3]

I swapped to a older mustang o2 sensor when when I went to a single turbo on my old 1jz worked just fine with the stock ecu.

 

[dirosa]

Anybody have experience with NGK 22014?

I'm pretty sure i'm using 22013 for an 88 mustang....seems to work pretty good, had it for a couple seasons and no problems.

where'd you get 22014 from?

edit: ah, an 85 mustang. I can't remember why I chose an 88

 

[87supramario]

I'll have to look in to the years. Dirosa I've seen a thread somewhere about people using Bosh 13913 with great results. But one of my sources no longer stock Bosh and they did a cross reference to the 22014 NGK model. But I'll go for the 22013.

Thanks guys!

 

[dirosa]

ya, I'd probably stick with the ngk number that's a direct cross from the bosch number just to be safe.

edit: found my receipt, I am using 22013 and no issues. not sure what the difference is.....

 

[pmmfred]

yeah i rigged up a 92 mustang 5.0 02 sensor, works for me