I just recently purchased a used Apexi Safc to go into my next upgrade phase. I bought it used so no user manual or anything like that. I need the wireing info. I searced around here and a few other places and so far this is the info I have aquired.
Reference I have 89 turbo 5-speed, will use Apexi Safc I
T=22 pin R=26 pin S=16 pin
Red (+ pos) to B+ BLK/Red (T12)
Green (RPM) to IGF L. Green/BLK (R3)
Grey (Throttle) to VTA White/Red (S11)
Brown (- ground) to E1 Brown -ecu side- (R14)
Black (- ground) to E1 Brown -harness side- (R14)
Pink (Airflow output to ecu) to KS L. Green/Red -ecu side- (S2)
Orange (Airflow Input fom AFM) to KS L. Green/Red -harness side- (S2)
Unknown: Blue, white, and yellow.
red, green, and grey tap only?
I assume pink and orange re-route the signal to the unit and so do black and brown?
If I have anything wrong please do tell.
Reference I have 89 turbo 5-speed, will use Apexi Safc I
T=22 pin R=26 pin S=16 pin
Red (+ pos) to B+ BLK/Red (T12)
Green (RPM) to IGF L. Green/BLK (R3)
Grey (Throttle) to VTA White/Red (S11)
Brown (- ground) to E1 Brown -ecu side- (R14)
Black (- ground) to E1 Brown -harness side- (R14)
Pink (Airflow output to ecu) to KS L. Green/Red -ecu side- (S2)
Orange (Airflow Input fom AFM) to KS L. Green/Red -harness side- (S2)
Unknown: Blue, white, and yellow.
red, green, and grey tap only?
I assume pink and orange re-route the signal to the unit and so do black and brown?
If I have anything wrong please do tell.
