I just installed my safc2 and need some help initializing everything. It seems the same as the safc1 but with more varaibles. I bought it used so it was set for a mitsu gsx.. I changed the cyl number 6 not sure what the arrows are for though? Also what would be good setup for ne points? Appreciate all the help thanks
safc 2 settings and tuning advice needed
- Thread starter 89supra7mgte
- Start date
tried it the guy set the fuel correction at -5 from 1k-6k. made good power but not sure why? should there be some change in fuel correction? at dif rpms? i am still running rich under full boost (14psi) 10.4 or so afr. good power though i know i can get more, made 371 on 18 psi untuned dropped to 14psi took out the 5% and made 355 still running rich. So i would assume by taking more fuel out to get around 11.5-12.5 i can lower the boost to 12psi and get the same amount of power or more correct?