No turn signals or hazards flashing

[maitai69691]

So my turn signals and hazards light up and stay on but no flashing. If manually move the eather switch on/off I can hear the relay click.
I'm thinking bad relay. Also relay is being a PITA to remove will not pull out.

 

[plaaya69]

Sounds like a bad flasher relay. Sometimes you can clean the relay contacts with some rubbing alcohol if you take it apart for a quick fix or buy another.

 

[maitai69691]

I got a good one from my parts car. Problem is the old one won't come out. It should just pull right out but will not budge. I might have to remove the whole thing so I can get it out with out braking any thing.

 

[plaaya69]

You should remove it with the plastic bracket attached so it is easier but I believe there is two white tabs on both sides of the relay.

 

[Mk3TargaJames]

You should remove it with the plastic bracket attached so it is easier but I believe there is two white tabs on both sides of the relay.

This.

I was yanking on my fog light relay to get it out when I had my issues, thought there was only one clip. Eventually found out after frustration and an epiphany lol.


Sent from my iPhone using Tapatalk

 

[maitai69691]

Thanks for the help. I did pull back the tabs but still nothing I'll try again tomorrow.

 

[maitai69691]

Got my old flasher relay out and was going to use the one of my 1991 parts car of course it difernt. Well does any one know if a ep33 flasher for a mr2 would work.

 

[f00g00]

Here ya go http://www.toyodiy.com/parts/xref?s=81980-16010&mG=on

 

[supraguy@aol]

Did you check the hazard fuse first?
Just thought I'd ask.

If it's actually blown, then the horn wont work either, if I recall correctly.