Need help finding dimension of turbo flanges ( I need to mill a special spacer)

[1986.5supra_kid]

Hello fellow enthusiasts,

The problem (t4 divided manifold,t4 to t3 divided adapter,twin scroll turbo)


I need to make a thick spacer to clear my exhaust manifold and have room to weld an elbow on my compressor.

I have access to a machine shop and raw materials. but i cant seem to find any clearer pictures (metric please) on divided t4 flanges. the one i have found was on garretts turbo website but i cant read the numbers on the print.

thank you SM members!

 

[Enraged]

3rd Google result http://www.driftworks.com/forum/technical/3809-turbo-flange-dimensions-t25-t3-t04.html

And multiply the dimension in inches by 25.4 to convert to metric (in mm)

 

[1986.5supra_kid]

Hello fellow enthusiasts,

The problem (t4 divided manifold,t4 to t3 divided adapter,twin scroll turbo)


I need to make a thick spacer to clear my exhaust manifold and have room to weld an elbow on my compressor.

I have access to a machine shop and raw materials. but i cant seem to find any clearer pictures (metric please) on divided t4 flanges. the one i have found was on garretts turbo website but i cant read the numbers on the print.

thank you SM members!

Thank you but i have the bolt pattern and the NON divided in metric in the attachments as seen in the first post.

In this picture i have found a divided t3 and t4 but i am not able to see the thickness of the divider in the middle or the radius of the ports


if i could find a higher resolution of the above picture or a edited one to clear up the numbers that would be great!