So I picked up one of these to minimize the amount of inputs used when I set up the traction control. Anybody ever set one up on a MK3? :1zhelp:
Motec TCMux
- Thread starter SD2JZA70
- Start date
Pretty sure Duane and Ron run them, from memory there's a minor downside to running them compared to using 4 Digi in's just can't think what it was sorry.
(I'll post it up when I remember/coffee kicks in)
(I'll post it up when I remember/coffee kicks in)
Hopefully those guys will chime in to shed some light on what the drwaback will be. I still have enough inputs do run the TC direct if need be.
It's just something small in the configuration that you can't do using a MUX, damned if I can remember what it was though....
It was something like you can't change the driven wheel balance.
It was something like you can't change the driven wheel balance.
Yeah, you only use one dig input on the ecu and the sensors are all fed to the TC mux. Not sure about the drawback though. I have no issues with mine 
Last edited: