hks pfc f-con question

[DSGsupra89]

Alright I bought an hks pfc f-con with an GCC (Graphic Control Computer) from a friend I did a my research and found I'm missing the pressure sensor for it and the FCD unit. I wounder if the GCC replaces the FCD unit or you have to put of both them on to make it work. I can get the pressure sensor online but I need the manual for the GCC if anyone know were I can find it online really need it thanks.

 

[Amtrack]

GCC is just for finer tuning your F-Con or VPC or EVC.

With the GCC 1 you can just tune on 6 set RPM points and -12% to +16% to the setting which either your F-Con, VPC or EVC is giving out.

didn`t found a better picture that fast, sorry.


With the HKS GCC 2 you have the option to use a "pressure" input. You can choose between RPM setup like the GCC 1 or boost setup. You can`t connect the GCC 2 to an EVC like the GCC 1 could.

In every case you will need an FCD (HKS FCD Type K3 on setting "3" if you want to stay HKS) to let your engine boost past fuel cut.

F-Con is giving you the needed fuel maps past fuel cut, FCD is eliminating the Fuel Cut and the GCC is a nice tool to make your fuel setup a little bit finer.

 

[DSGsupra89]

Sorry it took me so long I put everything in the car it run good buy I still dont have the FCD on the f-con I have the GCC1 by the way is there anywere I can buy one of those FCD.

 

[ma70t]

you can get them on ebay or a hks dealer but make sure you get the type k ok